When it comes to room setup, there are a lot of dos and don’ts. Here is a list of things to avoid if at all possible in order to get the best sound.
– Don’t put your seating right against a wall, back or side. This is the worst place in any room for smooth frequency response.
– Don’t put ANY speaker or sub that isn’t specifically designed to be built in inside a cabinet or build it into a wall. You’ll drastically change the response curve. The crossovers are specifically designed for a specific frontal area on the cabinet.
– Don’t put a sub in a corner if you can help it. Almost never is this even close to the best place for a sub. While it will yield the most sheer output, it will also yield the least smooth frequency response curve.
– Don’t force too big a screen into a room. This causes you to compromise on seating and speaker positioning. Set the seating right FIRST, then look at the appropriate screen size for that viewing distance that still allows good speaker placement.
– Don’t run your main speakers full range. Get a sub and let it do it’s job. Almost never is the best place for imaging and locking sound to the screen a good place for smooth bass reproduction. Cross your speakers at 80 Hz (this can vary slightly) and put your mains where they need to be. Then you can move the sub around to find the best place for bass response without messing other things up. The side benefit is taking off a huge load from your mains and the amp that’s driving them – leaving more headroom for increased dynamics without clipping the amp.
If you still have questions about your room setup, please contact our acoustic experts for advice. Visit our Acoustic Advice page.
Home Mixing Studio with Jonathan Wyman
Jonathan Wyman is a producer, mixer, and engineer who started his career at 19. Since [...]
Feb
Sound Proofing Vs. Acoustics Treatment
GIK Acoustics is an acoustic treatments company, yet we often get questions about soundproofing, a [...]
Feb
Budgeting for Room Acoustics
This video breaks down what kind of room treatment you can put together at different [...]
Feb
Untreated Vs Treated Room
Check out these sound tests of our DEMO room. In this video we pull all [...]
Feb
Understanding Sound Diffusion
In this video we breakdown the fundamentals of diffusion by outlining the different types of [...]
Dec
The Basics of Room Acoustics
Here’s a great primer for diving into the science of room acoustics. Acoustics can be [...]
Dec
Treating First Reflection Points
One of the most fundamental steps to treating a high end audio environment is locating [...]
Dec
Neil Balfour – Before and After audio with the PIB
Check out this test Neil Balfour put together where he demonstrates the difference between singing [...]
Dec